Gateway allows the thermostat connects to the Internet. momit Bevel It can be used in two different ways: _Placed on the wall to replace an old thermostat _Separated from the magnetic base to carry from room to room to priori-...
2. When the 3 LEDs stop blinking, the Gateway installation will have been completed successfully. 3. Register your Gateway in the Bevel App, by capturing the QR code found on the back of the device or manually by entering the serial number found on the device.
Page 5
2 inputs and then put the base lid (B) back on. 11. Remove the thermostat lid (A) and remove the battery plastic strip. 12. Register the thermostat (A) on the Bevel App Now you can place the thermostat (A) over the base (B) or take the thermostat anywhere you prefer.
Technical specifications Thermostat Base • 2 AA batteries •2 AA batteries •Temperature and humidity • Relay: sensor 2A to 30 VDC • Temperature precision ± 0.5A to 125 VAC 0.3ºC • Dimensions: •E-Ink Screen 144,55x80x29,63mm •Radio communication • Weight: 70g with Gateway •Not suitable for outside usage...
Page 7
8. Boiler How the thermostat’s LED Wifi works: Connected to momit server. Connected to Internet but not to momit server. Connected to our gateway but not to internet. There’s no internal connection or the display does not communicate with the base.
Need help?
Do you have a question about the Bevel and is the answer not in the manual?
Questions and answers