Table of Contents
Advertisement
Chapter 3
Configuring cluster members
3 - 8
Through the LCD panel, you have the option of configuring the
management IP address of each blade within a cluster.
Important
When you configure an IP address for a blade, that IP address corresponds
to the slot in which the blade resides. If you replace that blade with another,
the new blade automatically receives the previously-configured
management IP address.
To configure the management IP address of a cluster
member
1. Press the X button to access the LCD panel menus.
2. Use the arrow keys to select the System menu, and press the Check
button.
3. Use the arrow keys to select Cluster and press the Check button.
4. Use the arrow keys to select Cluster Mbrs and press the Check
button.
5. Use the arrow keys to select the appropriate blade (Blade [1-4]
Mgmt) and press the Check button.
6. Use the arrow keys to select Blade Mgmt IP and press the Check
button.
The LCD panel displays the current IP address of the blade.
7. Use the arrow keys to configure the IP address of the blade.
8. Press the X button until you return to the Blade [1-4] Mgmt menu.
9. Use the arrow keys to select the Commit option and press the Check
button.
The system saves the new IP address for the blade.
Advertisement
Table of Contents
