Disassembly And Reassembly: Module Qw-3410; Rremoving The Module - Casio GW-9400-1 Service Manual & Parts List

6. DISASSEMBLY AND REASSEMBLY: MODULE QW-3410

Note: The pressure sensor may be replaced separately.
The temperature sensor is mounted on the fl exible board of the pressure sensor;
therefore, replacing the pressure sensor may repair some temperature measurement
failures.
The O ring for the back cover has 6H, and 12H sides.
Be careful to place the O ring in the right direction.
6-1. REMOVING THE MODULE
1) When removing the back cover, do not misplace the spring/coils.
2) Release the Connector lock.
3) Remove the Sensor cable.
4) Please insert a precision screw driver into the gaps pointed by arrows between the module and
the case.
SPRING/COIL 1253-2 (Ni plated)
SPRING/COIL 1253-2 (Au plated)
Connector lock
– 10 –
QW-3410
BACK COVER
Sensor cable