Advertisement
Installation of Devilink™ RS
3. Light indications (LED)
Confi guration:
See Step-by-Step guide in Devilink™ CC instruction
manual.
4
1. Remove the front cover by gently
pressing the release tab on the
bottom side of the sensor.
2. Mount the room sensor
a. Mark up drill holes
b. Drill holes
c. Place fi xing plugs in holes
d. Screw mount the RS
3. Mount batteries
4. Put front cover on by placing the top
of the cover in place fi rst and then
gently press the bottom end in place.
Advertisement
