Page 2
Devilink™ RS Th e Devilink™ RS (Room Sensor) has a built-in tempera- ture sensor which measures the ambient temperature. It allows you to control the heating based on room tempera- ture, in the room where installed. With the Devilink™ RS you can also adjust the temperature.
Page 3
Placement of Devilink Placement of Devilink™ RS Not on a wall where it will be subjected to direct sunlight. Installation height should typically be between 80-150 cm. In wet rooms it should be installed on an even surface, according to local building regulations. At least 50 cm away from windows/doors that will be left open occasionally.
Page 4
3. Light indications (LED) Installation of Devilink™ RS 1. Remove the front cover by gently pressing the release tab on the bottom side of the sensor. 2. Mount the room sensor a. Mark up drill holes b. Drill holes c. Place fi xing plugs in holes d.
Trouble shooting Short green fl ash Not included in network Green fast fl ash Inclusion in progress Red fl ash + Inclusion failed for 5 sec. Link test in progress Red fl ash + Link test failed for 5 sec. ON + Red LED Low battery level fl ash every 2½...
Technical specifi cations Battery Alkaline 2xAA, 1.5V Battery lifetime Up to 4-5 years Backlight Green LED Ambient temperature 0˚ to +40˚C Battery monitoring Th e sensor has a built-in monitoring circuit, which will detect low or critical battery level. Transmission 868.42MHz frequency Transmission range in...
Should you, against all expectations, experience of the above. a problem with your DEVI product, you will fi nd that DEVI off ers a 2 year warranty from the date The DEVI Warranty shall not extend to equip- of purchase on the following conditions: ment which has not been paid in full.
Need help?
Do you have a question about the Devilink RS and is the answer not in the manual?
Questions and answers