Installing Spu-400 And Connecting Utp Cable; Camera-Side Utp Cable; Spu-400 Connector Wiring Chart - Samsung SPU-400 User Manual

Utp power supply
Table of Contents

Advertisement

3. Product Parts and Peripheral Device Connection
3-2. Installing the SPU-400 and Connecting UTP Cable

3-2-1. Camera-Side UTP Cable

① Connect an RJ-45 Plug to a camera UTP cable.
• The following pin alignment complies with the communication cable standards and is
provided for your convenient installation.
Copper Connector
UTP Coating
① Connect the RJ-45 plugs to the CH1 to 4 ports on the SPU-400.
② Connect RS-485 data cables according to the signals: positive and negative. (For
RS-485 data.)
③ This equipment is indoor use and all the communication wirings are limited to
inside of the building
3-2-2. Receiver-Side UTP Cable
Copper Connector
UTP Coating
① Connect an RJ-45 Plug to a Receiver UTP cable.
② Connect an RJ-45 plug to a Receiver connector on the SPU-400.
③ Connect the AC power plug to the AC Inlet on the SPU-400.
④ D ouble check the UTP connections, and then turn on the power switch on the back side.
The camera starts operating as the front LED turns green.
⑤ At the Receiver end, check the video signaling status.
⑥ This equipment is indoor use and all the communication wirings are limited to inside of
the building
6
UTP Power Supply Hub
User Guide

3-3. SPU-400 Connector Wiring Chart

RJ-45 Connector Wiring Chart for Video Input (Camera
No.
Color
1
Orange + White
2
Orange
3
Green + White
4
Blue
5
Blue + White
6
Green
7
Brown + White
8
Brown
RJ-45 Connector Wiring Chart for Video Output (SPU-400
No.
Color
1
Orange + White
2
Orange
3
Green + White
4
Blue
5
Blue + White
6
Green
7
Brown + White
8
Brown
RJ-45 Connector Wiring Chart for Data Input (SPU-400
No.
Color
1
Orange + White
2
Orange
3
Green + White
4
Blue
5
Blue + White
6
Green
7
Brown + White
8
Brown
UTP Power Supply Hub
SPU-400)
Function
Video Output +
Video Output -
RS-485 TX +
AC Power -
AC Power +
RS-485 TX -
AC Power +
AC Power -
Receiver)
Function
Camera 2, (+)
Camera 2, (-)
Camera 3, (+)
Camera 1, (-)
Camera 1, (+)
Camera 3, (-)
Camera 4, (+)
Camera 4, (-)
Controller)
Function
RS-485 2, (+)
RS-485 2, (-)
RS-485 3, (+)
RS-485 1, (-)
RS-485 1, (+)
RS-485 3, (-)
RS-485 4, (+)
RS-485 4, (-)
7
User Guide

Advertisement

Table of Contents
loading

Table of Contents