Samsung SCQ-041AP User Manual
Samsung SCQ-041AP User Manual

Samsung SCQ-041AP User Manual

Digital color quad switcher

Advertisement

SCQ - 041P
User's Guide
DIGITAL COLOR QUAD
SWITCHER

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SCQ-041AP

  • Page 1 SCQ - 041P User’s Guide DIGITAL COLOR QUAD SWITCHER...
  • Page 2 Part No.: AB68-00052A Printed in Korea...
  • Page 3: Safety Precautions

    SAFETY PRECAUTIONS WARNING: To Reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
  • Page 4: Important Safeguards

    User’s Guide IMPORTANT SAFEGUARDS 1. Read instructions: All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions: The safety and operating instructions should be retained for future reference. 3. Heed warnings: All warnings on the appliance and in the operating instructions should be adhered to.
  • Page 5 8. Accessories : Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product.
  • Page 6 User’s Guide 11.Power-Cord Protection : Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
  • Page 7 16.Damage requiring service : Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product.
  • Page 8 User’s Guide Prior to Use This User Guide is the basic guide for users of the SCQ-041P. The following information includes a product introduction, installation method, installation with other machines, use of the feature button, and system management based on the SCQ-041P specification using the setup menu.
  • Page 9 The Structure of User’s Guide This guide consists of a total of 6 chapters and 3 appendices. The guide is necessary to gain a basic understanding of the product and the intermediate procedures which can be selected according to the user’s requirements.
  • Page 10 User’s Guide Chapter 6, “Detecting Channel Loss”: Describes how to detect and recover channel loss. Appendix A, “SCQ-041P Specifications” provides general descriptions, such as SCQ-041P component specifications and a detailed illustration of the system exterior. Appendix B, “Remote Control Connector Table” describes the RS- 232C cable pin connection and various keys on the PC keyboard used for remote control.
  • Page 11: Table Of Contents

    Contents Chapter 1, Overview of SCQ-041P ... 1~7 Overview ... 1 Features and Characteristics ... 2 Part Names and Features ... 3 Chapter 2, SCQ-041P Installation ... 8~11 Configuring for Installation ... 8 Unpacking ... 9 Mounting the SCQ-041P in a Rack ... 10 Chapter 3, Connecting Other Components ...
  • Page 12 User’s Guide Chapter 6, Detecting Channel LOSS ... 30~31 Channel LOSS Search in Each Mode ... 30 Restoring to Normal Mode ... 31 Appendix A, SCQ-041P Specifications ... 32~34 Specifications ... 32 External Components ... 34 Appendix B, Remote Control Connector Table ... 35~36 RS-232C Table ...
  • Page 13: Chapter 1, Overview Of Scq-041P

    Chapter 1, SCQ-041P Overview Overview The SCQ-041P provides a quarter screen display feature on a monitor screen by reducing and composing the individual image produced by inputting four video image signals, such as a CCTV camera. The SCQ- 041P displays a maximum of eight alpha-numeric characters in corresponding to the title of the channel on the connected monitor screen.
  • Page 14: Features And Characteristics

    User’s Guide Features and Characteristics The SCQ-041P’s features and characteristics are as follows: • If you press “SETUP” button, located on the front of the SCQ-041P, the various menu-type system setting modes can be easily found and used. • You can connect a maximum of four color or black & white cameras. •...
  • Page 15: Part Names And Features

    DIGITAL COLOR QUAD SWITCHER SCQ-041P No. Display SINGLE DISPLAY QUAD DISPLAY Function Power switch Power SCQ-041P on/off. AUTO SWITCHER Function button to alternately display each of the channels without video loss. SINGLE DISPLAY-1 Displays only the signal input in channel No.
  • Page 16 User’s Guide FREEZE-1 Press “QUAD DISPLAY” button and then press this button to freeze channel No. 1. Press the button again to release the freeze function. CHARACTER Press the “SETUP” button to enter the system setting mode. You can input the name of the channel.
  • Page 17 SETUP ENTER RESET LIST NOTE You can find more information about the function of the buttons in Chapters 4 and 5. Press this button to display the Setup main menu on the quarter screen. You can setup various modes by selecting this menu. Press the button again to exit the system setup mode.
  • Page 18 User’s Guide BACK OF SCQ-041P VIDEO INPUT CAUTION Do not supply over 2V DC to the following input terminals: “VIDEO INPUT- CH1”, “VIDEO INPUT-CH2”, “VIDEO INPUT-CH3”, or “VIDEO INPUT-CH4.” No. Display VIDEO OUTPUT ALARM IN/OUT ALARM INPUT GND 1 Function VIDEO INPUT-CH1 Input signal by connecting output connector of camera to CH1.
  • Page 19 ALARM IN/OUT RS-232C ~AC IN NOTE The above connectors 1 to 4 are 75 Therefore, this unit can be used to input image signals of the other components. This is the alarm control connector, which connects the sensor to four alarm input terminals and connects the output terminal to an external unit, such as an alarm input terminal of a time lapse VCR.
  • Page 20: Chapter 2, Scq-041P Installation

    User’s Guide Chapter 2, SCQ-041P Installation Configuration for Installation This chapter describes the configuration required for the safe installation and usage of the SCQ-041P. You can install the SCQ-041P on flat table or rack. This system must be in horizontal balance and should not be placed on a vertical or slide setting.
  • Page 21: Unpacking

    Unpacking Upon receipt of the SCQ-041P system, unpack the box and put the unit on a floor stand, or the place the unit where you are going to install the system. Please check the contents of the package as listed below: •...
  • Page 22: Mounting The Scq-041P In A Rack

    User’s Guide Mounting the SCQ-041P in a Rack The is a standard 19-inch electronic equipment rack. If you intend to mount the SCQ-041P in a rack, do as following: 1. Remove the mounting screws from their holes and align each Rack mounting adaptor vertically along the front edge of the SCQ-041P enclosure.
  • Page 23 Chapter 2 After you have attached both mounting adaptor to the SCQ-041P, align the SCQ-041P within the appropriate space in the rack and attach it firmly to the rack. Warning Install the SCQ-041P on the Rack with a minimum distance between the SCQ-041P and the other system of at least 22mm(a half of the SCQ-041P height)
  • Page 24: Chapter 3, Connecting Other Components

    User’s Guide Chapter 3, Connecting Other Components You can connect a monitor, a camera, a VCR, a PC, and the other external components to the SCQ-041P. This chapter describes how to connect these components. CAUTION Please do not supply over 2V DC to the “VIDEO INPUT-CH1”, “VIDEO INPUT-CH2”, “VIDEO INPUT-CH3”, or “VIDEO INPUT-CH4”...
  • Page 25: Connecting A Vcr

    Chapter 3 Connecting a VCR VIDEO INPUT VIDEO OUTPUT VIDEO INPUT VIDEO INPUT CAUTION Connect monitor and VCR separately to both of “ VIDEO OUTPUT” connectors.
  • Page 26: Connecting A Monitor

    NOTE What is Auto Switcher Mode? This feature allows the unit to switch a single screen from four channels in sequence. But when the channel VIDEO LOSS happened or is set to interval time of “AUTO SWITCHER SET” as “0”, It is skipped.
  • Page 27: Connecting An Alarm

    Connecting an Alarm Connecting External Components Monitor 1 (Quarter screen display mode) Camera ALARM IN/OUT RS - 232C ALARM INPUT ALARM OUT GND 1 RESET VIDEO INPUT ~ AC IN Time Lapse VCR Alarm unit Sensor Monitor 2 (Quarter screen, Auto switching or single screen display mode) 1 2 3 VIDEO OUTPUT...
  • Page 28: Chapter 4, Configuring The Scq-041P

    User’s Guide Chapter 4, Configuring the SCQ-041P In accordance with the above procedure, you can proceed to configure system operation once you finish connecting the other components to the SCQ-041P. To proceed with system configuration, you must access the system setup mode to use the setup menu. The system setup procedure is as follows.
  • Page 29: Channel Title Setting

    Channel Title Setting If not in the system setup mode, press the “SETUP” button to enter the system setup mode. When video signals are input to the 4 channels, the title of each channel can be indicated by up to 8 letters in which alphabets, digits, and special characters can be combined.
  • Page 30 User’s Guide NOTE A BLANK instead of the “ ” character will appear on the actual screen. Press the “ CHARACTER” button to select a letter to be on the left out of the Character Table above. Press the “CHARACTER ”...
  • Page 31: Date/Time Setting

    Date/Time Setting If you are not in the system setup mode, press the “SETUP” button to enter the system setup mode. Then, you can set the current date (year/month/day) and time (hour:minute:second). Press the “MENU” button on the main menu screen, position “ ” at the “2.DATE/TIME SET”...
  • Page 32: Display Mode Setting

    User’s Guide When you finish setting the date and time, press “ENTER” button to return to the main menu. If you want to continue with system setup, move “ ” to your menu. When you finish the system setup, press the “SETUP”...
  • Page 33: Alarm Setting

    To select the item, use the “SELECT” button. • Use the “SELECT” button to choose “WHITE” or “BLACK” from the When you finish setting all items, press “ENTER” button to go to the main menu. If you want to continue with additional system setup, move “...
  • Page 34 User’s Guide • To move “ ”, use the “MENU” button. • Use the “SELECT” button to set the “1. BUZZER” menu item. If you choose “ON”, the alarm will warn whenever the alarm is on or channel loss is found. If you choose “OFF”, the alarm will not warn even though the alarm is on or channel loss is found.
  • Page 35: Auto Switcher Setting

    Auto Switcher Setting If you are not in the system setup mode, press the “SETUP” button to enter the system setup mode. You can set time of a single channel to be displayed continuously prior to changing a channel in automatic sequence display mode. Furthermore, you can set a channel to be skipped in the auto switcher display mode procedure.
  • Page 36: Loss Dettect Setting

    User’s Guide Loss Detect Setting If not in the system setup mode, press the “SETUP” button to enter the system setup mode. Then you can set the LOSS DETECT ON/OFF for each channel. Press the “MENU” button on the main menu screen to place the “ ” sign to the side of the “6.
  • Page 37: Chapter 5, Operating The Alarm

    Chapter 5, Operating the Alarm This chapter describes the circumstances under which the alarm is on, how to disable the alarm, the alarm input/output specifications, and how to view the alarm list. Alarm Input/Output Terminal Specification The following figure shows the alarm input/output terminal in the back of the system.
  • Page 38: Alarm Signal Mode

    User’s Guide Alarm Signal Mode When the four types of alarm signals are input, the alarm output and reset signal modes are as followings. ALARM IN 1 ALARM IN 2 ALARM IN 3 ALARM IN 4 ALARM OUT ALARM RESET NOTE The above figure shows the alarm signal mode when you set the alarm reset mode using M (manual).
  • Page 39: Viewing The Alarm List

    Viewing the Alarm List Press the “LIST” button located on the front of the system to display up to eight items of alarm and channel loss information in the current sequence. Order of occurrence: The number of the latest data will be “1”. Occurrence Year/Month/Date Once the alarm is on, you can check the time the alarm went on along with the relevant channel.
  • Page 40: Searching For Alarm Operation Information

    User’s Guide Searching for Alarm Operation Information This chapter describes the situations when the alarm is on and how to disable the alarm. First of all, keep in mind the following regarding alarm operation. • All alarm operations are performed within a few seconds after power on when all systems are stable.
  • Page 41: Disabling The Alarm

    3. A green light blinks on the “RESET” button LED. 4. The alarm output becomes TTL “LOW” level. 5. The alarm is disabled automatically after the alarm reset time is reached. NOTE You can set the “ALARM RESET TIME” value in the “ALARM SET” menu. 6.
  • Page 42: Chapter 6, Detecting Channel Loss

    User’s Guide Chapter 6, Detecting Channel LOSS The SCQ-041P provides a search Feature to scan channel LOSS by determining whether the signal is available or not. Channel LOSS Search in Each Mode Depending on the mode, the situation varies similar to the following when a channel LOSS is scanned.
  • Page 43: Restoring To Normal Mode

    Chapter 6 NOTE If you turn the buzzer “OFF” in the “ALARM SET” menu, the buzzer will not sound. Restoring to Normal Mode If you input the normal channel signal after channel LOSS occurs, the system senses the signal automatically and returns to the formal mode. If you turn off the channel that shows LOSS in the “6.
  • Page 44: Appendix A, Scq-041P Specifications

    User’s Guide Appendix A, SCQ-041P Specifications Specifications VIDEO input Camera : 4 channels, color or white/black VIDEO output Output 1 : Quarter screen display 1.0 V p-p, 75 Output 2 : User can choose among Quarter screen display, Single screen Alarm Feature Input : 4EA, TTL “LOW”...
  • Page 45 Character Indication Channel Title : each channel indicates maximum 8 characters (alpha-numeric, special characters) Date and time : year/month/day, hour:minute:second Alarm indication : “A” Channel Loss : “LOSS” Operating Configuration Operating temperature : 32 ~ 86°F (0 ~ 40°C) Relative humidity : 30% ~ 90% relative humidity Power voltage : AC100V -240V...
  • Page 46: External Components

    User’s Guide External Components POWER RESET ALARM INPUT ALARM 232C IN/OUT ALARM OUTPUT VIDEO 430 mm AUTO SWITCHER SINGLE DISPLAY QUAD DISPLAY DIGITAL COLOR QUAD SWITCHER SCQ-041P INPUT VIDEO FREEZE SYSTEM SETUP ALARM SETUP RESET CHARACTER ENTER LIST SELECT MENU 44 mm...
  • Page 47: Appendix B, Remote Control Connector Table

    Appendix B, Remote Control Connector Table The following shows the RS-232C pin connection for remote control of the SCQ-041P. PIN NO 11, 13, 14 4~6, 8~10, 12, 15~25 CONTROL ITEMS FG(FRAME GROUND) TXD(TRANSMITTED DATA) RXD(RECEIVED DATA) SG(SIGNAL GROUND) NO CONNECTION FUNCTION Operation depends on various functions of...
  • Page 48: Rs-232C Table

    User’s Guide RS-232C Table You can use the remote control feature by using a PC connected with an RS-232C cable. The keys on the PC keyboard function similar to the feature in the SCQ-041P. The following table shows relation between the PC keyboard and the feature buttons of SCQ-041P.
  • Page 49: Appendix C, Troubleshooting

    Appendix C, Troubleshooting While using the system, certain unexpected situations may cause problems with the system. Many times system difficulties can be solved through a simple troubleshooting check. If you encounter any problem using the SCQ-041P, please check the following points. If the screen is off.

This manual is also suitable for:

Scq-041p

Table of Contents