Fast Forward/Fast Reverse; Scanning; Selecting 2-Channel And 6-Channel Audio Playback; Goto Search - Audiovox Jensen VM9510TS Operation Manual

Fast Forward/Fast Reverse

Press the button (14) on the remote control or the
button (18) on the joystick to fast forward. Keep pressing and
releasing the button to increase the rate from "2X" to "4X",
"8X", and "20X". Continue pressing the
fast reverse.

Scanning

Press the SCN button (34) on the remote control to play the
first ten seconds of each chapter. Press SCN again to stop
the scan function and play the current chapter.
Selecting 2-Channel and 6-Channel Audio
Playback
2-Channel Audio (Down Mix) Support for CD, SD Card
and DVD
Linear pulse code modulation (LPCM) and pulse code
modulation (PCM) support is available for CD, SD Card and
DVD discs when 2-channel audio is selected.
6- Channel Audio Support for CD, SD Card and DVD
Surround I is available for decoding analog or digital 2-
channel down mixed sources. Surround II is available for
decoding digital bit-stream sources.
NOTE: 2-Channel audio support is available for AM / FM
tuner, TV tuner and Auxiliary input only.
Table 8: Speaker Output Options
Front Rear
Speaker Setup
Spkr Spkr
2CH mode X X
Play 2CH audio in X
6CH mode with Sur-
round "Off"
Play 2-channel (down X X
mix) audio in 6-chan-
nel mode with Sur-
round I "ON"
Play 6-channel audio X X
in 6-channel mode
with Surround II "ON"

Goto Search

During DVD or VCD playback, perform the following steps to
use the GOTO feature to access a specific location on a disc:
1. Press the GOTO button (21) on remote control to enter
"GO TO" mode.
2. Press the
control or the
select a category (highlighted in blue).
• For DVD mode, you can choose Time or Title/
Chapter search.
or button to
• For VCD mode, press the GOTO button to choose
between Track Search, Disc Search and Exit.
3. Enter a time into the field using the numeric keypad (29)
on the remote control.
4. Press the
Center Sub-
Spkr Woofer ENTER (joystick) button (20) to go to the specified
location on the disc.
5. Press the GOTO button again to exit.

Direct Chapter / Track Selection

During DVD, VCD and CD
X X
playback, you can use the numeric
keypad on the remote control (29)
to access a track directly.
X X
Viewing an Alternate
Picture Angle (DVD
Only)
Some DVDs contain scenes that have been shot
simultaneously from different angles. For discs recorded with
multiple angles, press the ANGLE button (13) on the remote
control to toggle available angles of the on-screen image.
or buttons (14, 22) on the remote
or buttons (16, 17) on the joystick to
DVD Search
Time – Go to specific
time in current title
Title/Chapter – Go to
specific time in a
chapter
VCD Track Search
Time – Go to specific
time in the current track
Track – Go to specific
track
VCD Disc Search
Time – Go to specific
time on disc
Track – Go to specific
track
button (18) on the remote control or the
16

Zooming

Press the ZOOM button (23) on the remote control to enlarge
and pan through the video image using the following options:
"Q1", "Q2", "Q3", and "OFF".

Multi-Language Discs (DVD Only)

Changing Audio Language
If you are watching a disc recorded in multiple languages,
press the AUDIO button (5) on the remote control to choose
a language.
Changing Subtitle Language
If you are watching a disc recorded in multiple languages with
subtitles, press the SUBTITLE button (9) on the remote
control to choose the language in which you would like the
subtitles to appear.
NOTE: During VCD playback, press the AUDIO button (5)
on the remote control to choose between Left Channel,
Right Channel, and Stereo.

PBC (Play back Control) (VCD Only)

For VCDs with play back functionality, play back control
(PBC) provides additional controls for VCD playback.
Press the MENU button (1) on the remote control to toggle
the PBC function "On"/"Off". Once PBC is on, playback starts
from track one of the play list.
NOTE: When PBC is activated, fast forward, slow
playback, and previous/next track are available. Repeat
and direct track selection are not available.
When PBC is activated, selecting random, scan, or search
playback automatically deactivates PBC.

Playback Information

During DVD and VCD playback, press the DISP button (10)
on the remote control to display playback information on the
screen, including the media playing and current playback
time.
DVD Playback Information
The following information is displayed at the bottom of the
screen during DVD playback:
• T : 5/8 – "5 / 8" indicates the fifth of 8 titles on the DVD is
currently playing.
VM9510TS