Dvr Operation - Fat Shark FSV1048 User Manual

Fat Shark

DVR Operation

1. SD card MUST be formatted before use to ensure stable recording.
2. DVR is for analog recording only, no HD recording.
3. Do not place alternative files that you want to keep into the DVR. The DVR may not
recognize the file space and write over your files. Use dedicated SD card.
Recording:
After powering goggles, turn on DVR by depressing vertically and holding the DVR control
button for 1 full second (long press).
RED LED should now show solid.
Ensure SD card is inserted and short press to start recording (RED LED will slowly FLASH
(~2 times/second). Single beep on record start.
Short press again stops recording (turns to solid RED LED). Double beep on record stop.
Playback
Note: requires turning off external receiver and removing any other AVin sources (to not
conflict with menu navigation OSD).
After turning on DVR and in stop record mode (SOLD RED LED) depress and hold DVR
button for 1 second (long press) to enter menu.
Menu Navigation
Playback (press right to enter)
Now can see: Preview shot with file number
Format (press right to enter)
Execute (press right)
Record (press right)
Now can see:
default (no recording until press the button to start)
auto start (auto start recording when power on)
auto start continuous (auto start recording when power on and overwrite the file if
space is full)
press up/down to select the recording mode
press right to enter to confirm
Pressing left from main menu exits menu
press up/down to change file number
press right to play
Up/down controls playback speed/direction
Right press pause/play
Left press, back to main menu
5 RC Vision Systems