Akai STD-2001 User Manual page 69

The menu setup system – DVB-T Section
3.4 Channel edit
The channel edit menu is shown in Picture 13. To change the name of a channel select
the channel and press ENTER. Following this, use the left or right function keys to
select a character and "up" or "down" to change a character. Press ENTER to confirm
the name change. To change the position of a channel, select the MOVE column and
press ENTER. Next, use the "up" and "down" function keys to change the number order
of the channel and the ENTER key to confirm the change. Select the DELETE column
and press ENTER if you wish to erase a channel. Use the TV / RADIO key to alternate
between television channels and radio channels. Note: If there are no channels available,
the user the user cannot access channel edit.
3.5 List of notes
Will show all the notes on programs that appear in you Electronic Programmes
Guide
(EPG) menu or that you have added manually.
4. System setup
4.1 Setting the TV
From the Settings Menu, shown in Picture 14, the TV system, the video out and the
aspect proportion of the TV. Press "up" or "down" to select the points. To change the
settings, press the "left" and "right" function keys to alternate between the different
settings, or press ENTER and then the "up" and "down" function keys
options. The possible options are:
of
TV system: NTSC, PAL, Automatic. See Picture 15.
Video: YCbCr, TV-RGB, P-SCAN-YUV, PC-VGA, S-VIDEO. See Picture 16.
TV type: 4:3 Panoramic, 4:3 Letterbox, 16:9. See Picture 17.
Picture 14: TV settings menu
Picture 13: Channel edit menu
68
Advanced features
Picture 15: TV system
to select a list