3-2. STANDARD DISASSeMBLy DRAWINgS
► This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
Part
ASSy CoveR ToP
Figure
Water valve
Noise filter
Sensor pressure
Description
1. Remove the two screws holding the Top Cover at
the back of the unit.
2. Remove the top-cover by lifting it up after pulling it
back about 15mm.
3. With the top cover removed you will now have
access to service the Water pressure sensor, EMI
Noise Filter, Hot and Cold Water Valves, Hose
Draw ASSY.
Removal and Reassembly _ 11