Part
DooR HINge
DRAIN PuMP
16 _ Removal and Reassembly
Figure
1. Remove the 2 screws holding the Door Hinge and
2. Remove the 15 screws holding the Holder Glass,
1. Push the Cover-Filter downwards to release the
2. Drain the remaining water through the drainage
3. Separate the Drain Filter by turning it
Description
separate the door.
separate the Holder Glass and replace the hinge.
latch.
hose.
Be sure to use a small bowl to collect the water
collected from the drain hose.
counterclockwise.
Since the remaining water may flow out, place
a bowl underneath it when separating the filter..