3-2. STANDARD DISASSEMBLY DRAWINGS
► This is a standard disassembly diagram and may differ from the actual product. Use this material as a reference when
disassembling and reassembling the product.
Disassembly
Part
Assy Cover Top
8 _ Disassembly and Reassembly
Figure
Noise filter
Water valve
Sensor pressure
Description
1. Remove the two screws holding the Top Cover
at the back of the unit.
2. Remove the top-cover by lifting it up after
pulling it back about 15mm.
3. Then, the Water (Pressure) Sensor, Noise Filter
and Water Valve can be replaced.