Advertisement
Saving scanned data
1
Click
and choose [Save]. The dialog appears.
2
Choose the desired location for saving the file, enter a file name, and click [SAVE].
If you want to export the data, please refer to the Help screens for Dr. PICZA.
Cutting scan data with the modeling machine to make a 3D object
1
Click
and choose [Open].
Open the file containing the scan data to be cut.
2
Click
.
MODELA PLAYER starts, and the 3D
data in the file you opened in step 1
appears on screen.
3
Load the material and install the blade on
the modeling machine. For more
information, refer to the manual for your
modeling machine.
4
Make the settings for the cutting
conditions. Clicking [
vances the setting screens in
sequence from A to D. Make the
settings in order from A to D.
(Clicking A, B, C, or D in the
figure displays the corresponding
setting screen, this should not be
used except when it's necessary to
make settings independently.)
] ad-
A
B
MODELA PLAYER screen
C
D
Click here to advance to the next settings.
7
Advertisement
