Install Remote Control Battery - Philips PT9000 User Manual

Philips portable tv user manual
Hide thumbs Also See for PT9000:
Table of Contents

Advertisement

»
The charge indicator turns to orange. It takes less than four hours
to fully charge the built-in battery.
»
When the built-in battery is fully charged, the charge indicator turns
off.
To charge the set when it is switched to standby:
1
Slide the POWERON/OFF switch to the ON position.
»
The set is powered on.
2
Press
to switch the set to standby.
3
Connect the supplied AC adaptor to the set and to the AC outlet.
»
The charge indicator turns to orange. It takes less than four hours
to fully charge the built-in battery.
»
When the built-in battery is fully charged, the charge indicator turns
to red.
Slow charge mode
To charge the set when it is powered on:
1
Slide the POWERON/OFF switch to the ON position.
»
The set is powered on.
2
Connect the supplied AC adaptor to the set and to the AC outlet.
»
The charge indicator turns to orange. It takes less than 15 hours to
fully charge the built-in battery.
»
When the built-in battery is fully charged, the charge indicator turns
to green.

Install remote control battery

Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard
batteries in fire.
Risk of decreased battery life! Never mix different brands or types of batteries.
Risk of product damage! When the remote control is not used for long periods,
remove the batteries.
20
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt9000/12

Table of Contents