Portable TV PVD1079 Quick Start Guide Install TV set stand Charge Setup DVB-T Setup AnalogueTV Plug in USB storage drive and SD card...
Page 2
Install TV set stand Align the catches on the stand base with the slots at the bottom of the set as shown. Fit the stand into the slots and turn anticlockwise until you hear a "click" sound. NOTE See the user manual for how to release the stand.
Page 3
Charge IMPORTANT: For the fi rst time to power on the set, use the AC power adaptor. Connect the supplied adaptor to the set and the AC outlet. light comes on. The battery pack will be fully charged in approximately 6 hours.
Setup DVB-T Antenna connection Before you start searching TV channels, connect your TV to the antenna as shown. POWER 2; Press on the remote to switch on the TV. To set up DVB-T, press will guide you through the DVB-T setup automatically. Enjoy the TV program by using the control keys on the remote.
Page 5
Setup AnalogueTV Antenna connection Before you start searching analogue TV channels, connect your TV to the antenna as shown. SOURCE > ATV. Press SETUP Auto Store Press > Press to start scanning. All channels found will be automatically stored after scanning is complete. Enjoy the TV program by using the control keys on the remote.
Page 6
Plug in USB storage drive and SD card Connect your USB drive or SD card as shown. You can playback the digital content in your storage media, such as: ➜ Photo: JPGE fi les ➜ Video: DivX® or MP4 fi les ➜...