Get Started; Charge The Bulit-In Battery - Philips PT9000 User Manual

4 Get started

Caution
•
Use of controls or adjustments or performance of procedures other than herein
may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of
this product. The model number and serial number are on the bottom of this
product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Charge the bulit-in battery

Caution
•
Risk of product damage! Make sure that the power supply voltage corresponds to
the voltage printed on the base of the set.
•
Use only the supplied AC adaptor to charge the battery.
•
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Note
•
The type plate is located under the stand of the set.
Fast charge mode
To charge the set when it is powered off:
1
Slide the POWERON/OFF switch to the OFF position.
»
The set is powered off.
2
Connect the supplied AC adaptor to the set and to the AC outlet.
EN 19