General Operation Safety Warnings - Cherry CHERRYMAX G746A Original Instructions Manual

TM-G746A Rev.: B DCR# 17-0231
GENERAL OPERATION and SAFETY WARNINGS
• Wear proper PPE
• Read Manual; operators must be trained in safety and correct tool operation
• Service and repairs shall be performed only by trained personnel.
• Do not pull rivet in the air or directed at any person.
• Do not use the tool with a damaged or missing stem deflector
• Rotate the Stem Deflector facing away from the operator or critical aircraft structure; use
a Stem Catcher if possible.
• Do not pound on the rear of the tool head to force rivets into holes.
• Make sure that the air muffler is not obstructed and is directed away from people.
• Do not exceed the recommended air pressure.
To ensure safety, use the pre-set air pressure regulator P/N P1505.
• Make sure to disconnect from the air supply before service or repair.
• Wash thoroughly after handling hydraulic fluid.
• Unauthorized modifications, including using substitute components will void warranty
and shall be at the customer's entire responsibility.
• Do not use any substitutions as they will impact the tool safety and reliability life.
DATE: 3/21/17 Federal Identification Code: 11815
(Personal Protection equipment)
4
when operating, servicing or repairing this tool
© 2017 Cherry Aerospace