Jarv lifefit +hr User Manual page 6

CHARGING YOUR JARV LIFE FIT +HR
SMART WATCH
Your Jarv Life Fit +HR Smart Watch comes with a built-in
rechargeable battery, Micro USB charging cable, and a
charging cradle. Charge fully before use. Insert the USB
cable into the USB port of the charging cradle and plug the
other end of the USB connector to either a PC or power
adaptor to start charging. Align the metallic charging
contacts in the back of the watch to the charging
connectors on the cradle. Please make sure they are
properly aligned
to ensure charging contact. A battery
meter will be shown on the watch display once charging is
successful. Initial charging time is approximately 2 hours.
Please note that charging your device automatically powers it on.
6