Jarv lifefit +hr User Manual page 5

PUTTING ON YOUR JARV LIFE FIT+HR
Your Jarv Life Fit +HR Smart Watch has an adjustable
wristband. Attach your Jarv Life Fit +HR Smart Watch band
to your wrist with the screen facing up and the band
wrapped around your wrist. Align the sizing buckle along the
band to find the best and most optimal fit.
POWERING ON/OFF YOUR JARV LIFE FIT+
HR SMART WATCH FITNESS TRACKER
To Power ON your Jarv Life Fit +HR Smart Watch, press
and hold the touch sensor button* for 3-4 seconds until the
screens display turns on and a "Welcome" message is
displayed.
To Power OFF your Jarv Life Fit +HR Smart Watch, press
and hold the touch sensor button* for 3-4 seconds until the
screen displays the " " button- Short press to select the
power off mode.
Your activity band goes into sleep mode by default when not in
use- it is reactivated by a short press of the touch sensor
button or by your wrist movement if applicable.
*If no action occurs when pressing down the touch sensor
button try moving your finger to a slightly different position to
activate the touch sensor function.
5