Getting Started Thank you for choosing the Jarv Active Fit +HR Fitness Tracker Activity Band. Please take the time to read this manual carefully, even if you are already familiar with a similar product. This product is compatible with • iOS devices 7.1 & above •...
Box Contents • Jarv Active Fit + HR Activity Band • Charging Cable • Users Guide...
Page 4
Charging your Jarv Active Fit +HR Activity Band Your Jarv Active Fit +HR Activity Band comes with a built-in rechargeable battery and a charging cable. Charge fully before use. Plug the USB connector to either a PC or power adaptor and take the other end of the charging cable and clamp it to the back 3 point position of the fitness band as shown on page 5.
Page 5
sure the contacts are properly aligned and short press the side button of the band to make sure it is powered on. To save power, the battery meter will disappear from the screen after a few seconds – just press the side button to confirm that it is still charging.
Page 6
Setting up your Jarv Active Fit +HR Activity Band 1-Download and Install the “VeryFit for Heart Rate” The Jarv Active Fit +HR Activity Band needs to pair with your device through the app. Make sure your Jarv Active Fit +HR Activity Band is compatible with your mobile device BEFORE installing the App.
Page 7
Once the app is installed, open it to get started. You will be guided through the process of connecting (pairing) your Active Fit +HR Activity Band to your mobile device and creating a personalized account. Pairing makes sure the tracker and mobile device can communicate with one another (sync their data).The personal information you are asked during...
Please make sure your Bluetooth function on your device is ON and that your Jarv Active Fit +HR Activity Band is Powered ON (Short Press the side button to power on) and fully charged (Refer to Charging your device instruction).
Creating an account Proceed to enter all the requested personal information to create an account.
Page 10
App interfaces MAIN PAGE Once the App is connected successfully to your device, it will record and analyze your activities and sleep status.
Page 11
Main Page Features: 1-Select the Activity Interface to view data on your daily activities such as Calorie expenditure, Distance traveled, Steps taken and Activity duration. 2-Select the Sleep Interface to view data on your sleep duration and quality. Your activity band automatically recognizes your status and monitors your sleep progress and analyzes the deep sleep and light sleep hours.
Page 12
The Device page also provides firmware and battery information on your Jarv Active Fit +HR Activity Band, and allows you to update the device firmware if necessary.
Page 13
Using your Jarv Active Fit +HR Activity Band 1-Switching between different function modes Short Press the side button on the Jarv Active Fit +HR Activity Band to switch in between modes 2-Change Display information Information shown on the screen will vary as you...
Page 14
Note: “Alarm Mode” and “Find phone Mode” will only be displayed on the device screen after this function is turned ON in the App Standby Mode: Long press the side button of the band for 8-10 seconds to enter Standby mode and preserve battery life.
Page 15
Sports Mode Under Sports Mode data, double press the side button of the band to start a workout/ new activity and display information including duration, steps taken, calories burned and distance traveled during the workout. Short press the side button on the band to display the different modes as listed below Sport Heart Step Pedometer...
Page 16
Pairing issues? 1. Please make sure that your Bluetooth function on your device is turned ON and that your device is a supported model - OS Android 4.3 & above and iOS 7.1 & above. 2. Please make sure the distance between your phone and device is no more than 1ft.
Warranty At Jarv, we are dedicated to making the best quality product. To back this up, your Jarv Active Fit Activity Band has a One (1) year limited warranty, valid from the date of purchase. Should you require additional information or have any questions about your product or its warranty, please contact us via email at: Customer Service: customerservice@jarvmobile.com...
Please do not use any corrosive chemical to clean the device, use a soft cleaning cloth for the tracker and some mild soap and water for the band. If your Jarv Active Fit +HR Activity Band does get wet please dry it thoroughly before putting it back on.
several attempts to charge, please visit www.jarvmobile.com for support. Never disassemble the unit as that could cause leakage of an electrolyte substance FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.