Jarv active fit +hr User Manual page 4

Putting on your Jarv Active Fit +HR
Activity Band
Your Jarv Active Fit +HR Activity Band has an
adjustable wristband. Attach your Jarv Active Fit +HR
Band to your wrist with the screen facing up and the
band wrapped around your wrist. Adjust the size to
find the best and most optimal fit.
Powering on your Jarv Active Fit +HR
Activity Band
Short press the side button of the band to power on
the watch.
Charging your Jarv Active Fit +HR
Activity Band
Your Jarv Active Fit +HR Activity Band comes with a
built-in rechargeable battery and a charging cable.
Charge fully before use. Plug the USB connector to
either a PC or power adaptor and take the other end
of the charging cable and clamp it to the back 3 point
position of the fitness band as shown on page 5.
the charging contacts are
*Please make sure that
properly aligned
and that the battery meter appears
on the display to confirm that your band is charging.
If the battery meter does not appear, please make
4