Table of Contents
Advertisement
Refilling the water tank
If the water tank is empty, the prompt to fill the water
tank appears on the display. The operation is stopped.
Carefully open the appliance door.
1.
Remove the water tank and fill it.
2.
Slide the water tank back in and close the appliance
3.
door.
Start the operation.
4.
The operation continues.
Setting the type of heating and temperature
Example in the picture: 15 minutes steaming S at
90 °C.
Touch a type of heating on the left of the field.
1.
The temperature is highlighted in white in the
display.
Use the rotary selector to set the temperature.
2.
Touch the s field.
3.
The cooking time is highlighted in white in the
display.
Turn the rotary selector to set the cooking time.
4.
Press the l Start/Stop button to start.
5.
The appliance begins to heat up.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Notes
If you have started the steaming S type of heating,
■
the cooking time only begins to count down once
the set temperature has been reached.
If you open the appliance door during steaming, the
■
appliance operation stops. After the appliance door
has been closed again, the appliance must first heat
up to the set temperature before the cooking time
continues to count down.
Changing
After starting the appliance, the temperature is
highlighted. When you move the rotary selector, the
temperature is changed and applied immediately.
To change the type of heating, interrupt the operation
beforehand using the l Start/Stop button. Touch the
symbol for the type of heating. The type of heating
appears with the corresponding default temperature.
When you change the type of heating, the other
Note:
settings are also reset.
After each use
:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Moisture and dirt remain in the cooking compartment
after each operation. Therefore dry and clean the
appliance after each use. Also empty the water tank
after each use.
Drying the cooking compartment
:
Warning – Risk of scalding!
The water in the evaporator dish may still be hot. Allow
it to cool before wiping.
Leave the appliance door ajar until the appliance has
1.
cooled down.
Remove any dirt from the cooking compartment
2.
immediately.
Wipe out the cooled cooking compartment and
3.
evaporator dish with the cleaning sponge and dry
with a soft cloth.
Wipe the front of the units dry if condensation has
4.
formed.
Operating the appliance
en
13
Advertisement
Table of Contents
