Nursery Works sleepytime rocker Instruction Manual page 2

The Product and Manufacturing Process:
Nursery Works products are made from sus-
tainable woods wherever possible and also
from high-quality wood veneers. The primary
material used in our products is Paulownia
wood which is harvested from plantations
and renewed every 10-12 years. Zero-grade
MDF, containing well below the regulated
limit of formaldehyde, is used sparingly in
components of our products to achieve our
signature carvings and single board slat cut-
outs. All paints, finishes and glues are
low-VOC.
Each Nursery Works product is a unique piece
crafted largely by hand. We use a special-
ized machinery process to create our hall-
mark carvings and each piece is constructed
and lacquered by hand. Our lacquering pro-
cess involves over a dozen steps to sand and
polish the furniture to achieve our glossy
finish. With proper care and assembly, your
Nursery Works products will be a part of your
family for years to come. Please note that
due to the handcrafted nature of our prod-
ucts and our use of solid woods, each piece
is unique and may contain irregular qualities,
such as natural markings, miniscule burrs, or
slight discolorations. These natural character-
istics are inherent in wood, are not consid-
ered manufacturing defects and do not
merit replacements.
1