Advertisement
DEBUG MODE-6
HDMI DEBUG MODE-2/2
Input/Output State and Example of FL Display(Continued)
Video Input Format
Status Description
Source Device PC Video Format : OK,
Source Video Format:
Sink Device EDID : OK
PC Format
Normal State
Source Device PC Video Format : OK,
Sink Device Hot plug : Low
Error State ---> Remedy
Source Device PC Video Format : OK,
Sink Device HDCP Authenification : Fail
Error State ---> Remedy
Source Device PC Video Format : OK,
Sink Device EDID Reading : Error
Error State ---> Remedy
VGA input via DVI-HDMI conversion cable
Normal State
VGA input via HDMI cable
Normal State
NOTE:
1. 1920x1080/24Hz can be displayed in Through Mode only.
2. 640x480p/60 is displaed as "VGA" instead of itself.
Remedy for Error State
Remedy No.
The most possible cause is the hardware trouble of Sink device. Fix it.
1
Refer to HDCP and Authentification error in "DEBUG MODE-7". Follow the procedure.
2
Refer to Resolution error in "DEBUG MODE-7". Follow the procedure.
3
Refer to EDID error in "DEBUG MODE-7". Follow the procedure.
4
Check other HDMI Inputs of AV receiver. If NG, the most possible cause is the hardware trouble of Sink device. Fix it.
5
The most possible cause is the hardware trouble of Sink device. Fix it.
8
The same as
9
The same as
10
FL segment No. --->
0
Description --->
Horizontal Resolution
8
9
10
Remedy
.
2
.
4
1
2
3
4
5
6
Input
Input
Vertical Resolution
Error
Blinks
TX-SR507/SR577/DTR-20.1
7
8
9
10
11
12
i/p/I/P
Frame Rate
Error mark
13
14
Advertisement
