Advertisement
DEBUG MODE-5
HDMI DEBUG MODE-1/2
HDMI-related operations can be checked to some extent by displaying HDMI Debug Mode.
If a trouble of HDMI video occurs, first display this mode and try to find out the cause and remdy.
To enter this mode
Hold down DISPLAY
DISPLAY button for 3 seconds. Information display will last for about 8 seconds.
Segment No. of FL Display
0
FL segment No. --->
Input/Output State and Example of FL Display
Video Input Format
Status Description
Normal Source
Video Formats
Source Device Video Format : OK,
Sink Device EDID : OK
Normal State
Source Device Video Format : OK
Sink Device Hot plug : Low
Error State ---> Remedy
Source Device Video Format : OK
Sink Device HDCP Authentication : Fail
Error State ---> Remedy
Source Device Video Format : OK
Sink Device Resolution : Error
Error State ---> Remedy
Source Device Video Format : OK
Sink Device EDID Reading : Error
Error State ---> Remedy
Source Device Video Format : OK
Sink Device :
Busy(Cannot accept HDMI signal)
Error State ---> Remedy
FL Display
1
2
3
4
5
FL segment No. --->
0
Description --->
Display --->
(Example)
1
2
3
4
5
Description --->
Progressive/ Interlace
i : HDMI, Interlace
p : HDMI, Progressive
I : DVI, Interlace
P : DVI, Progressive
Frame Rate
/6 : 60 frame/sec
/5 : 50 frame/sec
Video signal input
: Analog input
: HDMI input
7
6
8
9
10
1
2
3
4
5
6
Input Resolution
i/p/I/P
Frame Rate
Input Resolution
i/p/I/P
Frame Rate
i/p/I/P
TX-SR507/SR577/DTR-20.1
11
12
13
14
7
8
9
10
11
12
Output Resolution
i/p/I/P
Blinks
Error mark
Error mark
Error mark
Output Resolution
i/p/I/P
13
14
Advertisement
