Kenmore 146.53496710 Use & Care Manual page 27

LP Tank
13
 Place the hose holder into the slot of the side panel. See A
 LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP
 Unscrew igniter cap from control panel. Insert one AA battery (provided) into battery slot
A
Failure to install Drip cup clip and cup will cause hot Drip to
drip from bottom of grill with risk of fire or property damage.
tank. Fill and leak check before attaching to grill and regulator. Place LP tank into hole in
bottom shelf with tanking collar opening facing to left side panel as shown. Raise tank holder
to hold LP tank securely in place. See B
with positive end (+) facing outward. Screw cap back onto panel.
B
Failure to install tank correctly may allow gas hose to be
damaged in operation.
146. 53496710 • 27