Connecting Auxiliary Audio Equipment; Setting The Security Code - Sony CDX-M800 Operating Instructions Manual

Connecting auxiliary audio
equipment
The unit's AUX IN (external audio input)
terminal on this unit is also used as the BUS
AUDIO IN (audio input) terminal.
You can listen to the sound from your car
speakers by connecting optional Sony portable
devices.
Note
If you connect an optional Sony CD/MD unit, you
cannot connect any portable devices and "AUX" will
not appear in the display as a source.
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
"AUX."
Adjusting the volume level
You can adjust the volume for each connected
audio equipment.
1
Press (MENU).
2
Press M or m repeatedly to select
"AUX Level."
3
Press (ENTER).
4
Press M or m repeatedly to select a
desired volume level.
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
5
Press (ENTER).
To deactivate auxiliary equipment in
the music source display
1
Press (OFF).
CD playback or radio reception stops.
2
Press (MENU).
3
Press M or m repeatedly until "AUX-A
on" appears.
4
Press , to select "AUX-A off."
5
Press (MENU).
To restore the indication, select "AUX-A on."

Setting the security code

This unit has a security function to discourage
theft. Input a 4 digit number as your security
code.
If you set it, you need to input the stored code to
turn on the unit should you re-install the unit in
another car or after changing the battery.
1
Press (SOURCE).
2
Press (MENU).
3
Press M or m repeatedly to select
"Security."
4
Press (ENTER).
Code Set display is displayed.
1 Press M or m repeatedly to enter the
first digit (0-9).
2 Press , to move the cursor to the
2nd digit, then press M or m
repeatedly to enter the 2nd digit.
Each time you press M, a digit goes
up and each time you press m, a
digit falls.
3 Repeat step 2 to enter the 3rd digit
and the 4th digit.
5
Press (ENTER).
Check Code display appears.
6
Press M or m repeatedly to select
"YES."
7
Press (ENTER).
The display returns to the normal display.
Notes
• The security code cannot be entered by the number
buttons (1-6).
• Make sure not to forget your security code.
• If you select "NO" in step 6 and press (ENTER), the
display returns to the Code Set display in step 4.
continue to next page t
25