Manual Tuning; Presetting Stations - Panasonic RF-D20BT Operating Instructions Manual

Listening to a station
1
Press [
select a station from the station
list.
2
Press [ENTER] to tune to the
selected station.
Note:
" " indicates a secondary service station.
Secondary service stations are always
listed next to their primary station in the
station list.

Presetting stations

You can preset up to 5 stations into the
direct preset buttons.
1
While listening to a station, press
and hold the desired direct preset
button ([1] to [5]).
Example: press and hold [2] to store
2
Press [ENTER] to preset the
station.
█
Listening to a preset station
Press the direct preset button ([1] to
[5]) to listen to the preset station.
10
TUNE/SELECT
current station into preset
2.

Manual tuning

You can perform manual tuning to a
] to
particular channel or frequency. This
can be useful when you are adjusting
the antenna to achieve the best
possible reception and scanning a
particular channel to update the station
list.
1
Press [MENU].
2
Press [
select "Manual tune" and then
press [ENTER].
3
Press [
select a frequency or channel and
then press [ENTER].
The display shows the received
signal strength of the selected
frequency. Adjust the antenna to
achieve the best reception.
Threshold indicator
Adjust the antenna so that the
received signal strength (solid
rectangles) exceeds the threshold
indicator.
TUNE/SELECT
TUNE/SELECT
] to
] to