Sony Cybershot DSC-T2 Service Manual page 4

1-1. ATTENTION WHEN REPAIRING
Note 1: The shooting images are recorded into internal memory prior to the others within the Memory Stick.
When the internal memory is full, the shooting images is recorded into the Memory Stick.
Note 2: All the shooting images on repairing are recorded into the internal memory, so be sure to erase the shooting images after repairing.
1-2. FLOWCHART FOR OPERATIONS ON SY180-MC186 BOARD REPLACEMENT
In case of SY180-MC186 Board replacement, repair in the order of following flowchart.
At this time, be careful about the repairing process is different in cases of turning power on the set is possible or not.
In case of turning power on is possible.
Copy the data in internal
memory to the personal
computer
Read out the adjustment
data (*1)
• USB serial No.
• Wide limit data
• Anti-blur correction data
Write the destination data
All kinds of adjustment
(VIDEO/CAMERA/LCD)
(*1) For details, please refer to the service manual for adjustments separately issued.
(*2) "PMB Portable" is the embeded application software in the set. Installer is available in each destination and language.
There are seven kinds of installers.
Note : "PMB Portable" is not installed in the SY-180 board for repair.
Therefore, it is necessary to re-install the "PMB Portable" for each destination and language.
DSC-T2_L2
Turning power on is
possible
SY-180 board
replacement
(*1)
Write USB serial No.
(*1)
(*1)
Write back the backup
data in the personal
computer to internal
memory
End
1. SERVICE NOTE
In case of turning power on is impossible.
1-1
ENGLISH
ENGLISH
Turning power on is
impossible
SY-180 board
replacement
Write the destination data
(*1)
Write USB serial No. (*1)
All kinds of adjustment
(VIDEO/CAMERA/LCD)
(*1)
Re-install "PMB
Portable" (*2)
End
JAPANESE
JAPANESE