HELP11
INSTALLATION METHOD OF THE PIEZOELECTRIC (2.0CM) BUZZER (SP901)
Caution :
Be careful about handling this Piezoelectric (2.0CM) Buzzer (SP901), because of it is easy to
damage the terminal on it by force.
1 Install ST-169 flexible board positioning with dowels on ST holder.
Piezoelectric
(2.0CM)
Buzzer (SP901)
Dowels
2 Solder 2 points of contact on ST-169 flexible board with Piezoelectric (2.0CM) buzzer (SP901) through a hole on ST holder.
DSC-T2_L2
Dowels
Soldering
ST-169 Flexible Board
ST-169 Flexible Board
ST Holder
Piezoelectric
(2.0CM)
Buzzer (SP901)
ST Holder
HELP