Philips iTV Owner's Manual page 7

In this sub menu, the Control settings of the TV can be configured.
•
Channel Guide: Select "YES" to allow the Channel Guide Menu to be displayed if the "Channel Guide" button
is pressed on the guest Remote Control. Select "NO" to disable this feature.
•
Min Volume: This item sets the limit for minimum volume allowed for the television set. Use the Right/Left
cursor buttons to adjust.
•
Max Volume: This item sets the limit for the maximum volume allowed for the television set. Use the
Right/Left cursor buttons to adjust.
•
Audio Out Volume: Set the volume of the external audio output (e.g. bathroom speaker). This volume is
independent of the main speaker volume level. (*Note: Available on certain models only).
In this sub menu, the Close Caption and V-Chip settings of the TV can be configured.
•
ESP: Energy Saving Programmability Mode
(ESP) controls the maximum continuous viewing
time allowed by the control system. The ESP
Menu function is shown as "ESP", and its valid
values are 00 - 99 (in hours). 00 value means
OFF.
•
Audio/Video Mute: The Audio/Video Mute
menu function determines whether the video
should be blanked and the audio muted, if the
currently tuned channel has no signal.
•
Source Menu Item: Toggle between
"YES/NO" to enable or disable selection of the
TV Source Input via the guest Setup menu when
using the guest Remote Control.
•
Save CC: This menu item sets the option of
saving the Close Caption selection to "Yes" or
"No".
•
CC: This menu item allows selection of Close
Caption channels, or to turn Close Caption
"OFF".
•
Saved V-Chip: This menu item sets the option of
saving the V-Chip selection to "Yes" or "No".
•
V-Chip Menu Item: This menu item sets the
option of toggling the V-Chip Menu Item to
"Yes" or "No".
•
V-Chip Setup: This sub-menu allows the setting
and disabling of Movie and TV ratings for the V-
Chip.
- 7 -