Sony LSPX-P1 Reference Manual page 6

Frequency Range & Power for RF
Specification
LSPX-P1 (Projector)
Wireless LAN (IEEE802.11a/b/g/n)
Frequency Range/Output Power
• 2400 - 2483.5 MHz/< 20 dBm
• 5150 - 5250 MHz/< 23 dBm
• 5250 - 5350 MHz/< 23 dBm
• 5470 - 5725 MHz/< 23 dBm
Bluetooth
Frequency Range/Output Power
• 2402 - 2480 MHz/< 20 dBm
LSPX-PT1 (Wireless Unit)
Wireless LAN (IEEE802.11a/n)
Frequency Range/Output Power
• 5150 - 5250 MHz/< 23 dBm
Notice
If static electricity or electromagnetism
causes data transfer to discontinue midway
(fail), restart the application or disconnect
and connect the communication cable
(HDMI cable) again.
This product has been tested and found
compliant with the limits set out in the EMC
regulation for using connection cables
shorter than 3 meters (9.8 feet).
The electromagnetic fields at the specific
frequencies may influence the picture and
sound of this unit.
6
GB
Disposal of waste
batteries and electrical
and electronic equipment
(applicable in the
European Union and
other European countries
with separate collection
systems)
This symbol on the product, the battery or
on the packaging indicates that the product
and the battery shall not be treated as
household waste. On certain batteries this
symbol might be used in combination with
a chemical symbol. The chemical symbols
for mercury (Hg) or lead (Pb) are added if
the battery contains more than 0.0005%
mercury or 0.004% lead.
By ensuring these products and batteries
are disposed of correctly, you will help
prevent potentially negative consequences
for the environment and human health
which could otherwise be caused by
inappropriate waste handling. The recycling
of the materials will help to conserve
natural resources.
In case of products that for safety,
performance or data integrity reasons
require a permanent connection with an
incorporated battery, this battery should be
replaced by qualified service staff only. To
ensure that the battery and the electrical
and electronic equipment will be treated
properly, hand over these products at
end-of-life to the applicable collection point