Configuration 1 Menu - Philips BDL6531E User Manual

User Manual BDL6531E
4.2.5.

CONFIGURATION 1 MENU

CO N F IG U RAT IO N 1
AU TO AD JU ST
P O W ER S AV E
LA NGUA GE
PANE L S AV ING
CO L O R S Y S T E M
CO N F IG U RAT IO N RE S E T
FACTO RY RE S ET
Se l A djus t
AUTO ADJUST
Note: For VGA input only.
Use this function to automatically optimize the display of VGA input image. Press the SET button to adjust.
POWER SAVE
Set the display to reduce the power automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
• RGB - Select ON to let the display enter DPMS (Display Power Management Signaling) mode when no
signal can be detected from the HDMI, DVI-D, and VGA inputs after three successive cycles. Use the
PLUS/MINUS button to make selection.
• VIDEO - Select ON to let the display enter power saving mode when no signal is detected from the
VIDEO, S-VIDEO, and COMPONENT inputs after three successive cycles. Use the PLUS/MINUS button
to make your selection.
LANGUAGE
Select the language for the OSD menu.
Use the PLUS/MINUS button to select a language.
PANEL SAVING
Choose to enable the panel saving functions to reduce the risk of the "image persistence". Press the SET/
PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
• COOLING FAN - Set the working pattern of the display's internal cooling fan. Select AUTO and the
cooling fan will only be activated when the display reaches a certain temperature. Select ON and the
cooling fan will work constantly when the display power is on. Use the PLUS/MINUS button to make
selection.
• BRIGHTNESS -
according to the ambient
become unavailable. Use the PLUS/MINUS button to make selection.
• PIXEL SHIFT - Select the time interval for the display to slightly expand the image size and shift the
position of pixels in four directions (up, down, left, and right). Use the PLUS/MINUS button to make
selection (OFF-900 seconds from current time). This helps to alleviate the issues of ghost imaging.
COLOR SYSTEM
Select the color system depending on the input video format.
Use the PLUS/MINUS button to toggle between
• AUTO
• PAL 3.58
• NTSC 4.43
E NG L IS H
AU TO
E nter Ba ck Qui t
Select ON and the brightness of the image will be reduced to an appropriate level
surroundings, and the BRIGHTNESS setting in the PICTURE menu will
• PAL 4.43
• SECAM
• NTSC 3.58
RETURN TO THE CONTENTS