Cleaning And Troubleshooting; Cleaning - Philips BDL6531E User Manual

User Manual BDL6531E
7.

CLEANING AND TROUBLESHOOTING

7.1.

CLEANING

Caution When Using the Display
• Do not bring your hands, face or objects close to the ventilation holes of the
display. The top of the display is usually very hot due to the high temperature of
air being expelled through the ventilation holes. Burns or personal injuries may
occur if any body parts are brought too close. Placing any object near the top
of the display could also result in heat related
the display itself.
• Be sure to disconnect all cables before moving the display. Moving the display
with its cables attached may damage the cables and thus cause fire or electric
shock.
• Disconnect the power plug from the wall outlet as a safety precaution before
carrying out any type of cleaning or maintenance procedure.
Front Panel Cleaning Instructions
• The front of the display has been specially treated. Wipe the surface gently
using only a cleaning cloth or a soft, lint-free cloth.
• If the surface becomes dirty, soak a soft, lint-free cloth in a mild detergent
solution. Wring the cloth to remove excess liquid. Wipe the surface of the
display to remove dirt. Then use a dry cloth of the same type to dry.
• Do not scratch or hit the surface of the panel with fingers or hard objects of
any kind.
• Do not use volatile substances such as sprays, solvents and thinners.
Cabinet Cleaning Instructions
• If the cabinet becomes dirty, wipe with a soft, dry cloth.
• If the cabinet is extremely dirty, soak a lint-free cloth in a mild detergent
solution. Wring the cloth to remove as much moisture as possible. Wipe the
cabinet. Use another dry cloth to wipe over until the surface is dry.
• Do not allow any water or detergent to come into contact with the surface of
the display. If water or moisture gets inside the unit, operating problems, or
electrical and shock hazards may result.
• Do not scratch or hit the cabinet with fingers or hard objects of any kind.
• Do not use volatile substances such as sprays, solvents and thinners on the
cabinet.
• Do not place anything made from rubber or PVC near the cabinet for any
extended periods of time.
RETURN TO THE CONTENTS
damage to the object as well as