Test The Ipsec Vpn Tunnel - ZyXEL Communications ZyWALL 110 Handbook

www.zyxel.com
CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced Settings >
Authentication > Peer ID Type

Test the IPSec VPN Tunnel

The Site-to-site VPN with Dynamic Peer can only initiate the VPN tunnel from the
peer has a dynamic IP Address. Go to CONFIGURATION > VPN > IPSec VPN > VPN
Connection, click Connect on the upper bar. The Status connect icon is lit when
the interface is connected.
CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time and
Inbound(Bytes)/Outbound(Bytes) Traffic.
MONITOR > VPN Monitor > IPSec
To test whether or not a tunnel is working, ping from a computer at one site to a
computer at the other. Ensure that both computers have Internet access (via the
IPSec devices).
81/749