Remote Management - Philips BDL3731V User Manual

Swapping the main picture and the sub-picture
Press the SWAP button.
The main picture and the sub picture are interchanged.
It is available in PIP and PBP mode only.
Sub Input
SCART 1
Main Input
SCART 1
X
SCART 2
VIDEO
S-VIDEO
COMPONENT
X
RGB
X
DVI X
HDMI 1 X
HDMI 2 X
Swapping the audio of the main or sub-picture
Press the A.SWAP (Audio SWAP) button repeatedly.
You can hear the audio of the main or sub-picture alternately.
It is available in PIP and PBP mode only.
Selecting the main picture or the sub-picture
Press the S.SELECT button repeatedly.
You can select the main or sub-picture alternately and adjust the status
of selected picture.
It is available in PIP and PBP mode only.
PIP Settings
Sub Input
SCART 1
Main Input
SCART 1
X
SCART 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
HDMI 1
HDMI 2
" " Max. : 480p, 576p, 1024x768/60 Hz
In the PIP mode, the sub input source is differently defined
for the default value (scart1 or scart2) depending on your LCD model.
6.14

REMOTE MANAGEMENT

This display can be managed remotely through the RS232 9-pin port,
by using a Serial Interface Communication Protocol (SICP).
The specifications of the SICP protocol can be found in a separate
document, called "SICP User Manual".
29
User Manual BDL3731V
SCART 2 VIDEO S-VIDEO
X
X
X X
X X
X X
X X
X X
SCART 2 VIDEO S-VIDEO
X
X
X
X
X
X
X
X
X