Samsung DVD-P360/CDM Service Manual page 24

Disassembly and Reaasembly
4-2-5 Ass'y Bracket Deck Removal
1) Push the Hook Œ in the direction of arrow "A" and lift up the Gear Feed B ´.
2) Push the Hook ˇ in the direction of arrow "B" and lift up the Gear Feed B ¨.
3) Remove the 2 Screws ˆ and lift up Motor Feed Ass'y Ø.
4) Remove the 2 Screws ∏ and lift down Motor Spindl Ass'y ".
5) Remove the 3 Screws ' and remove 3 Holder Cam Skew ˝, Shaft Pick Up Ô, Ass'y Pick Up .
6) Remove the 1 Screws Ú and remove Gear Back Lash Æ.
' 3 SCREWS
˝ 3 HOLDER CAM SKEW
 ASS'Y PICK UP
Æ GEAR BACK LASH
Ô SHAFT PICK UP
Ú 2 SCREWS
Ø MOTOR FEED
ˇ HOOK
ASS'Y
"B"
∏ 2 SCREWS
ˆ 2 SCREWS
ΠHOOK
"A"
CHASSIS SUB
¨ GEAR FEED A
´ GEAR FEED B
" MOTOR SPINDLE
Fig. 4-10 Ass'y Bracket Deck Removal
4-9
Samsung Electronics