Digital Surround Receiver; Hdmi (High Definition Multimedia Interface) Connectors - Philips 50PF9630A 50 User Manual

HDMI (High Definition Multimedia Interface) connectors

HDMI HDMI
CABLE / ANTENNA
1 2
HDMI
HDMI HDMI
CABLE / ANTENNA
1 2
75
HDMI
DVI

Digital Surround receiver

DIGITAL
MONITOR OUT
AUDIO
L R
OUT
DIGITAL
AUDIO
OUT
75
H Pr L
V Pb R
VIDEO Y
DIGITAL
AUDIO
IN
AV1
S-VIDEO
AV3
Pr
VIDEO
L Pb
S-VIDEO
AV2
R Y
DIGITAL
MONITOR OUT
AUDIO
L R VIDEO IR OUT
OUT
DIGITAL
AUDIO
IN
VIDEO IR OUT
HDMI is the leading new standard for Digital video and audio
interconnection.To the
HDMI
such as a Set Top Box or compatible DVD-R or DVD player with HDMI, or
DVI-equipped devices like a computer.
So you can display high-definition pictures on this TV in the digital form.
Note: If the accessory device has DVI output only, use a DVI to HDMI adapter
cable to connect to the
HDMI
.)
DIGITAL AUDIO IN
&
Connect your HDMI device with one of the
é
Select the connected digital device in the Setup, Source menu, p. 16.
The connectors allow the following TV and monitor display
HDMI IN
modes:
HD Standard Definition TV (SDTV)
Enhanced Definition TV (EDTV)
High Definition TV (HDTV)
VGA 640x480
PC
SVGA 800x600
XGA 1280x768
Notes:
- If necessary, you can adjust the picture position to the center of the screen with
the cursor keys.
- Due to legal requirements, it is possible that with certain copy protected PCM
audio qualities from a device connected to the
signal is muted.
AUDIO OUTPUT
- Your TV supports HDCP (High-bandwidth Digital Content Protection). This is a
system for protecting DVD content outputted via DVI from being copied. It
provides a secure digital link between a video source (DVD, PC, etc.) and your TV.
Content is encrypted at the source device to prevent unauthorized copies from
being made.
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing
output standards which may cause difficulties for the television to properly
display.
- In case no signal is detected from your HDMI device, turn off the HDMI device
and then on again.
To get an optimal viewing, it is advised to turn your DVD player to one of the
following TV display standards: 1920x1080i, 1280x720p, 720x480i or
720x480p.
Connect a Digital MultiChannel Surround receiver to the
connector at the bottom of the TV.
connector you can connect HDMI devices
connector. (Then also connect the audio cable to
connectors.
HDMI
640/720 x 480i
640/720 x 480p
1920x1080i
1280x720p
60 Hz
60 Hz
60 Hz
input, the
HDMI
DIGITAL AUDIO OUT
DIGITAL
35