Clock - Philips 50PF9630A 50 User Manual

Most of the TV channels are not transmitting clock
information. There are few cable channels but they are
at the end of the channel ring. There is no clock
transmission in antenna channels. In such cases either
clock extraction is taking a long time or there is no

clock.

Clock
This allows you to use your TV as a clock.
Note: Adjusting the clock is necessary for the correct working of Instant record (See
use of the remote control, p. 7) and Lock after (See TV settings, Channels, p. 24)
features.
Auto clock mode
&
Select in the Setup menu.
Clock
é Press the cursor right to select the
" Press the cursor right to instruct the TV to get the time automatically or
manually.
Auto clock channel
(only available when Auto clock mode is set to Automatic)
With the cursor buttons, select the channel number where time can be
found by the TV. Typically time can be found on PBS as well as some other
channels.
Time - Day (only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day.
If Auto clock mode Manual
been done, the system will keep the entered time and day.
Time zone (only available when Auto clock mode is set to Automatic)
This function allows you to select your local time zone. Broadcasted time
information will correct the clock display for your local time.
& Select with the cursor down.
Time zone
é
Press the cursor right to select your local time zone.
Daylight saving
(only available when Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially broadcasted signals.
This menu item allows you to disable the automatic setting of daylight
saving time.This is useful if you live in an area or state where daylight saving
is not applied, but you receive channels from other areas where daylight
saving signals are broadcasted.
& Select with the cursor down.
Daylight saving
é Press the cursor right to select
for daylight saving time, based on specially broadcasted signals.
" Select to disable automatic clock correction based on the specially
Off
broadcasted signals.
.
Auto clock mode
has been selected, and no clock search has
for automatic clock correction
Automatic
17