Source - Philips 50PF9630A 50 User Manual

16

Source

This menu allows you to identify the accessory devices you have connected to
the external inputs/outputs.
&
Select in the Setup menu.
Source
é
Press the cursor right.
"
Select the input to which the accessory device is connected.
'
Press the cursor right again to enter the list of types of devices connected
to the selected input.
( Select the accessory device with the cursor up/down.
When you select ,
AV1 AV2
In , a list appears allowing you to identify which type of accessory device is
attached to this input.The TV detects the presence of the connected device
and the signal is routed appropriately.
Once you have selected the source type, e.g. DVD, this source will
automatically be selected when your remote control is in DVD mode, see
p. 6, and when you press the
Digital Audio
Select when the TV expects digital audio for a connected
Digital Audio In
device to come from a Digital audio input.
Make your selection of the source to which the device with digital audio
input has been connected.
In addition to accepting audio input via Digital Audio In, the TV can output
Digital audio via the
DIGITAL AUDIO OUT
amplifier or receiver.
If your amplifier or receiver has a matching connector for Digital Audio In,
you can connect it with a single cable to the TV's
See Connect Accessory Devices, Digital Surround Receiver, p. 35.
, , , , Side
AV3 HDMI1 HDMI2
button on the remote control.
AV+
connector to an external
DIGITAL AUDIO OUT
or Digital Audio
.