Location And Function Of Controls; On/Standby Indicator - Sony VPL-CH355 Operating Instructions Manual

B Overview

Location and Function of Controls

Main Unit
0
9
8
7
qg
qh
qd
qd
5
qd
6
a Projection lens
b Focus ring (page 18)
c Zoom lever (page 18)
d Lamp cover (page 58)
e Air filter cover/Ventilation holes
(intake) (page 60)
f Ventilation holes (intake)
(page 60)
g Ventilation holes (exhaust)
Caution
Do not place anything near the ventilation
holes as this may cause internal heat
buildup. Do not place your hand or
deformable items (plastic, etc.) near the
ventilation holes or around the projector, as
it may cause damage or personal injury.
4
Location and Function of Controls
2
qa
qj
1
4
h ON/STANDBY indicator
3
(page 53)
qs
i LAMP/COVER indicator
(page 53)
j Control panel (page 7)
k Connector panel (page 5)
l Remote control detector
m Front feet (adjustable) (page 20)
n Speaker
o Security lock
Connects to an optional security cable
qf
manufactured by Kensington.
For details, visit Kensington's web site.
http://www.kensington.com/
p Security bar
Connects to a commercially available
security chain or wire.
If it is difficult to pull out, pull out the
Security bar using a screwdriver.
q Lens shift cover (page 19)
For lens shift adjusting, remove this to
access the lens shift screws inside the
unit.
qs
Security bar