Philips BDP3010/F8 Service Manual page 20

FLOW CHART NO.10
P-ON+1.2V is not outputted.
Is 5V voltage supplied to Pin(2) of IC2601?
Is the "H" signal inputted to the Pin(7) of IC2601?
Replace IC2601.
FLOW CHART NO.11
P-ON+1.8V is not outputted. (P-ON+1.2V is outputted normally.)
Is 5V voltage supplied to Pin(2) of IC2602?
Is the "H" signal inputted to the Pin(7) of IC2602?
Replace IC2602.
FLOW CHART NO.12
EV+3.9V is not outputted.
Is 5V voltage supplied to the collector of Q1011?
Is 4V voltage supplied to the base of Q1011?
Replace Q1011.
FLOW CHART NO.13
P-ON+3.3V is not outputted.
Is 5V voltage supplied to Pin(1) of IC2600?
Is 1.2V voltage supplied to Pin(4) of IC2600?
Replace IC2600.
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Check D1013, D1014, C1019, C1025 and
the periphery circuit, and service it if defective.
Replace IC2000.
Check D1013, D1014, C1019, C1025 and their
periphery circuit, and service it if defective.
Replace IC2000.
Check D1013, D1014, C1019, C1025, and
their periphery circuit, and service it if defective.
Check IC1012, R1046, R1048, and their
periphery circuit, and service it if defective.
Check D1013, D1014, C1019, C1025 and
their periphery circuit, and service it if defective.
No
Is the "L" signal outputted to the collector of Q2600?
Yes
Check D2600 and their
periphery circuit, and
service it if defective.
1-8-3
No
Check Q2600 and
PWSW1 line, and
service it if defective.
E5P31TR