Network; E-Mail; Mailbox Setting - Samsung SDR-B73303 User Manual

DVR Menu

network

Go to "Main Menu" ; "Parameter" ; "Network" ; "Network" to enter the interface.
Select the network connection option (PPPoE, DHCP, Static) to set the port. User can view and do the recording, playback or
backup of the video remotely.
Take DHCP as an example. In this mode, the router automatically assigns IP address for the DVR. After restarting the DVR or
DHCP server, the IP address obtained by the DVR may be different. As a result, you need to check the IP address and port
numbers before remote access to the DVR every time. The operation procedure is as follows:
1. Select DHCP, click Save and restart the DVR. Input Client Port and HTTP
Port (the two ports must be different).
2. Remotely visit the DVR by using IP address plus HTTP port through web
browsers.
http://Public network IP: HTTP port number (such as 00080)
http:// Intranet IP: HTTP port number (such as 00080) (Only available in the
same LAN)
For PPPoE, Static and DHCP, after setting the IP address for the DVR, the
extranet port shall be mapped in the router before visiting DVR through public
network.
Save the setting to apply the changes made. If there are multiple DVRs in a LAN, make
`
M
sure their MAC addresses are different.

e-mail

Go to "Main Menu" ; "Parameter" ; "Network" ; "Email" to enter into the menu interface. Receive or Send DVR alarm Email
and set parameters like Email address, SSL, Email Enable, and Interval.
• encryption: Disable, SSL, TLS and Auto optional. Auto means it can detect
the encryption type automatically. It is recommended to set the encryption
type as Auto.
• sMtp port: Mail sending port used by SMTP (Simple Mail Transfer Protocol).
Server is generally Port 25 or Port 465 when SSL is used by Gmail.
• sMtp server: Enter the address of the server for the mailbox in use.
• user name: Enter a server to connect to. For example, email "aaa@gmail.
com" should correspond to server "smtp.gmail.com"
• password: Enter the password of the SMTP server user.
• sender address: Sender's mail address, which must correspond to the
server used. For example, mailbox "aaa@gmail.com" should correspond to
server "smtp.gmail.com".
• receiver 1/2/3: Recipient's mail address, used to receive alarm image and message from DVR side. If system alarms
continually and sends email images frequently, save the images to another location or remove them, so as to avoid excessive
space occupation and thereby affect your normal use of mailbox.
• time interval: A mail will be sent every three minutes by default. If the time interval for mail notification is set too short, email
server may deem mails as junk mails, so they cannot be transferred normally.

Mailbox setting:

For example, if you are using Gmail, sign in to the GMAIL mailbox. https://mail.google.com
20_ DVR Menu