Opening The Door; End Of The Programme - AEG L8FEC68SC User Manual

E.g. the washing or pre wash phase is
running:
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
.
During the washing cycle, the appliance
mixes the detergent, the stain removal
for fabric treatment and/or the fabric
softener with water before introducing
them into the drum; the indicator
appears and disappears on the display
according to the different programme
phases (the arrows flash alternatively).
If you select the Pára plus the steam
phase indicators come on.
The steam phase is running:
The anti-crease phase is running:
.
10.10 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the button Start/Pauza.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pauza again.
The washing programme continues.
10.11 Cancelling a running
programme
1. Press the button ON/OFF to cancel
the programme and to deactivate
the appliance.
2. Press the button ON/OFF again to
activate the appliance.
Now, you can set a new washing
programme.
.
MIX
.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase. The
water and the detergent are
not drained out in order to
avoid waste. The display
shows the maximum
duration of the programme,
updating it about 20 minutes
after the starting of the new
programme.

10.12 Opening the door

If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the button Start/Pauza.
In the display the related door lock
indicator goes off.
2. Open the appliance door. if
necessary, add or remove the items.
3. Close the door and touch the button
Start/Pauza.
The programme or the delay start
continues.

10.13 End of the programme

When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pauza button
goes off.
The door unlocks and the indicator
goes off.
1. Press the ON/OFF button to
deactivate the appliance.
ENGLISH 25