Table of Contents
Advertisement
This removes all possible dirt from the
drum and the tub.
9. SETTINGS
9.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the Skvrny/Předpírka and the
Máchání+ buttons simultaneously
until the indicator
off on the display.
You can activate this option:
• After you touch the Start/Pauza
button: all the buttons and the
programme dial are deactivated
(except ON/OFF button ).
• Before you touch the Start/Pauza
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
comes on/goes
To deactivate/activate the acoustic
signals, touch the Máchání+ and the
Odložený start buttons simultaneously
for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
touch the Máchání+ button and the
Volba button simultaneously the
relevant indicator comes on/goes off.
This option adds two rinses and the
display shows
9.4 Jemné+
Set the Jemné+ option to optimise the
fabric softener distribution and improve
the fabric softness.
This option increases slightly
the programme duration.
To activate/deactivate this option touch
the Teplota button and the
Odstřeďování button simultaneously until
indicator comes on/goes off
the
above the
indicator.
3. Press the ON/OFF button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
ENGLISH
21
.
Hide quick links:
Advertisement
Table of Contents
