Problem Area
Items to Inspect
Will not capture
To determine whether or not the
an image
problem is with the camera key, try
capturing an image by pressing the
navigation key
Inspect the two camera flex
assembly connections to the circuit
board
If the issue has not been resolved !
If the issue is still not resolved!
4/000 21-1/FEA 209 544/123 A
©
Company Internal
Sony Ericsson Mobile Communications AB
Repair Action
•
If pressing the navigation key does
take a picture – Perform the steps
listed in the camera key portion of the
"Key Problems" section
•
If pressing the navigation key does
not take a picture– Perform the
remaining inspect/repair procedures
in this section.
•
If either connection is improperly
connected - Reestablish proper
connection
•
If one or both of the connections is
dirty or oxidized – Clean both halves
of the connection(s)
•
If any portion on the camera
assembly flex film is damaged –
replace the camera flex assembly
•
If either of the camera flex assembly
connections on the circuit board is
damaged – Send to a repair location
allowed to perform electrical repairs
on this product
•
Replace camera flex assembly if it
has not already been replaced
•
Send to a repair location allowed to
perform electrical repairs on this
product
Trouble Shooting Guide, Mechanical
Inspection Reference
26(30)