Installing 2.5" HDD / SSD
NOTE:
•
T he illustrations in this section are for reference only and may
vary per model.
•
This bay supports 7mm/9.5mm 2.5" HDDs/SSDs.
•
Some models may only support one (1) HDD/SSD.
To install or upgrade the HDD / SSD:
1.
Follow steps 1-4 under the Upgrading memory modules section
to remove the top cover of your VivoMini.
2.
Remove four (4) screws from the HDD/SSD bracket.
3.
Remove the HDD/SSD bracket.
4.
Remove the cable from the holder, then remove the holder
from the HDD/SSD bracket.
VivoMini VC66 Series
29