Asus CM-32 User Manual page 87

When LAN LED is off with an Ethernet connection on any
of the LAN ports:
1. Check if the Ethernet cable is secured at the modem router
and at the computer.
2. Check if you are using a RJ45 Ethernet cable.
3. Try to use another Ethernet cable.
4. If still can not access to the GUI via a LAN port, contact
support hotline.
Restart your network in the following sequence:
1. Unplug the modem router.
2. Turn off the computers.
3. Plug in the modem router and then wait for 2
minutes.
4. Turn on computers.
Check if your Ethernet cables are plugged properly.
• When the Ethernet cable connecting your powered-on
computer with the router is plugged in properly, the
corresponding LAN LED will be on.
Check if the wireless setting on your computer matches that
of your computer.
• When you connect your computer to the router wirelessly,
ensure that the SSID (wireless network name), encryption
mehtod, and password are correct.
Check if your network settings are correct.
• Each client on the network should have a valid IP address.
ASUS recommends that you use the router's DHCP server to
assign IP addresses to computers on your network.
87