Setting A Programme; Starting A Programme - Electrolux EWF 1484 EDW User Manual

14 www.electrolux.com
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.

10.5 Setting a programme

1. Turn the programme knob and set the
programme:
• The indicator
• The display shows the level of the
Time Manager, the programme
duration and the indicators of the
phases of the programme.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something
incorrect, the display shows
the message

10.6 Starting a programme

without the delay start
Press
• The indicator of
and stays on.
• The indicator
the display.
• The programme starts, the door
locks, the display shows the
indicator
flashes.
.
.
stops to flash
starts to flash on
.
B
4.
• The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
• The display shows the
10.7 Starting a programme with
the delay start
1. Press
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
automatically the
programme duration
agree with the laundry
load.
new value.
again and again until the
: